Auto Window Installation Directions

Installing a window on your automobile is a process that a DIY mechanic should be able to accomplish rather easily. The procedure involves inserting the new window glass into the window frame and connecting the glass securely to the window regulator. The installation procedure is pretty much the same for all vehicles. If you feel you are up to the task, plan on spending about an hour on this project.

Instructions

1

Go to the car door with the window that you intend to repair. Pull the handle and open the door fully.

2

Use a Phillips-head screwdriver to remove the screws holding the door panel to the door frame. Some of the screws may be concealed by plastic covers. In this case, use a small blade or flat-head screwdriver to pry off the covers and then remove the exposed screws. Lift the panel away from the door and put it aside for later reassembly.

3

Locate the window regulator; it is just below the window frame. Move the regulator to its lowest possible position within the doors access panel.

4

Slide the new window glass into the door frame. Align the hex-bolt holes on the bottom of the window with those on the window regulator. Tighten the hex bolts between the holes on both components to secure them together.

5

Reattach the door panel to the door by placing it on the door frame and refastening the mounting screws. Open and close the window to verify that it is installed correctly.

Read More..

Windshield Removal Installation Tools

Windshield removal and installation require a number of tools. The tools are not necessarily difficult to use, but experience, patience and caution are needed for anyone attempting to work with windshields. Installing or removing a windshield is a difficult, time-consuming task, and should only be done by an experienced person. Before making use of any of these tools, make sure you are wearing proper eye protection.

Trim Removal Tool

The trim removal tool is used at the very start of removing a windshield. This helps you to remove the stainless-steel clips holding the glass of the windshield in place. The trim removal tool will also help you to remove the windshield wipers.

Cutting or Utility Knife

A utility or cutting knife cuts the windshields seal. The knife is carefully used in order not to scratch or break the glass. When cutting the seal after removing the trim, the knife should be pointed upward and the action of cutting done slowly to prevent damage to the glass.

Cotter Pin Tool

The cotter pin tool is a pointed screwdriver with a hook at the end of it. This instrument aids the pull rope, which is used for grabbing seal when installing the windshield. This metal tool can easily damage the glass and must be used cautiously.

Other Tools

Other tools you may need for removing a windshield include a cold knife, a putty knife and a windshield wire kit. For installing a windshield, you may need nylon rope, butyl ribbon sealer and urethane adhesive.

Read More..