How to Install an Oil Pressure Gauge

Basically, an oil gauge is used to indicate oil pressure levels. It is commonly installed on the dashboard of a vehicle in order to help the driver to properly monitor the oil pressure levels. When the warning light on the gauge lights up, it is an indication that the oil pressure level in the engine is very low; hence it must be replenished immediately to avoid engine damage. That being said, the installation of an oil pressure gauge is highly important.

In normal conditions the needle on your oil pressure gauge will remain in the same position and you will become used to it being there. You need to be aware when the needle begins to move downwards as this will normally happen long before the warning light comes on and gives you more time to prevent damage to your engine. If your car is more than a few years old, the gauge is indicating that your oil needs changing or that the usual wear and tear of age is beginning to happen. There may be a great deal of life left in your vehicle, but you will need to carefully watch your oil level from today. If the needle dips wildly downwards and then back up to a normal level, there may already be damage or a drastically low oil level. It can prove to be very expensive to ignore the warning signs.

Installing an oil gauge so that you can keep an eye on your oil pressure is not the simplest task and is probably best carried out by a professional, but if you want to do it yourself here is some information that may help.

Whether you will be installing an electric or mechanical oil pressure gauge, it would be ideal that you know how to properly integrate it into your vehicle system. To help you accomplish that, here is a detailed installation guide that you can follow:

Step one: It is critical that you know where to properly place the gauge. You should know that the port where the gauge must be placed is normally situated six inches behind the vehicles oil filter. In order to easily find the port, you may have to remove the side front wheel on the passengers side. Once it has been removed, you will see a silver-colored filter (located behind the factory oil pressure switch) that has two wires attached to the electrical connector.

Step two: After locating the port, you have to first drain the oil before removing the electric connector present on the pressure switch.

Step three: Once done, you may now disconnect the switch. The rest of the procedure will depend on the type of gauge that you need to install. Normally, pressure gauges include an installation manual, which you have to carefully read and understand, in order to ensure proper installation.

Step four: When the oil gauge has already been installed, make a test run to know if it is already functional. If you are unsure that you did the right thing, it is best that you find a professional mechanic to do the installation for you.

Read More..

Replacing Car Clutch and Oil Filter

Have you ever replaced a car clutch yourselves? Unlike other car related works, its not that easy or simple. First of all you should be clearing the basics. Still, its not just about getting things right. There are lots of things to learn. Only by practicing the act, youll be gaining the right kind of exposure. And from then on, things will get easier for you. But to get into such a level, you should be willing to work a lot. If you are not that interested in repairing kind of things, you may simply learn the steps and try it yourself.

Do you think the procedure related with the replacement of clutch in a rear wheel drive car and that in a front wheel drive car would be the same? Well, not at all? Actually they are with different steps. These are two procedures that have to be done in different fashion. For the same reason, before you get any further, you should first of all understand the type of car you are with. If you are with a front wheel car, you should be following the procedures mentioned this type of cars. Otherwise, the other procedure, which is meant for rear wheel drive cars.

Youll need a clutch disk and a pressure plate to carry out the process. The steps would be a bit general for both types of cars. You may have a look at a manual that explains the process pretty briefly. This would be helping you to clear the basic stuffs regarding the replacement of clutch in a car. Like every other car repairing process, this time also you should be lifting the car up using a jack. Dont play with the jack, if you dont have any experience dealing with this equipment.

So, as mentioned above the steps for replacing the car clutch in a rear wheel drive and front wheel drive cars are different. Before starting with things, its better to have a look at a good manual that explains the procedures pretty briefly. The same rule can be applied for changing oil filter also. Anyways, if you are having any doubts regarding the steps, related to the above two procedures, its better to seek the help of a mechanic that knows his job well.

Read More..