How to Fix Brake Pads in a Kia Sportage

Brake pads are a component of disc braking systems. These alloy-made pieces are compressed against a rotor to cause the vehicles wheels to stop spinning. Due to the mechanical pressure and heat, brake pads always wear out eventually, and fixing them in the interim is occasionally necessary to retain proper braking function. While full replacement is generally recommended, you can also repair certain braking problems on your Kia Sportage if you have a bit of mechanical knowledge.

Instructions

1

Place the wheel blocks opposite of the end that the vehicle needs to be lifted. Loosen the wheel lugs on the wheel that needs to be removed to access the brake pads using the 1/2-inch ratchet wrench and lug socket. Raise the vehicle using the hydraulic lift and place the jack stands at structure points for extra security.

2

Remove the lugs from the wheel and slide the wheel underneath the vehicle. Remove the metal caliper clip using a slotted screwdriver and pull the caliper off the rotor assembly. Use a rubber mallet to gently tap the caliper if it is stuck in place. Remove the brake pads using a slotted screwdriver, prying them away from the piston seats.

3

Apply dime-sized amounts of brake pad glue to the back of both brake pads for brakes that rattle while the brake pedal is not applied. The glue will prevent the pads from rattling away from the piston seats. Firmly seat the pads back into the piston seats and allow them to sit for approximately five minutes before reassembling the caliper.

4

Run your hand over the brake pad surface for pads that are noisy or squeak while the brake pedal is applied. Feel for any rough or high spots on the pad. Use a piece of 200-grit sandpaper to scrub the pad. Continue to rub the pad until the high spot is gone. Place the pads into the caliper piston seats and reassemble.

Read More..

How to Put a Window Back on a Track in a KIA Sportage

If the window in your KIA Sportage has become stuck in a stationary position, it is most likely due to the window coming off the window regulator. In order to solve this problem you need to remove the window and place it back on the regulator correctly. Carrying out this work is a rather easy task and can be completed in less than half an hour. You can find the tools you need for the task at your local auto store.

Instructions

1

Open up the door of your Sportage which contains the stuck window. Remove the screws on the inner door panel using the Phillips screwdriver. Lift the panel away from the door and move to one side.

2

Remove the two screws which fix the door handle in place. Pull the door handle away from the door. Unhook the two linkage arms inside the door that make up part of the door handle assembly. Remove them from the door.

3

Move your window regulator to its lowest point within the door. This will make it much easier to remove the window from the frame.

4

Use a hex wrench to remove the two mounting bolts which connect the window to the window regulator. Pull the window out of the door.

5

Use your hand to move the window regulator up and down to make sure it is working correctly. Place the window back in the window frame. Line up the bolt holes on the bottom of the window with those on the top of the regulator. Fix them together by threading a mounting bolt between each of the two holes. Place the door panel and door handle assembly back in place by following the removal steps in reverse.

Read More..