Pages

Showing posts with label repair. Show all posts
Showing posts with label repair. Show all posts

Saturday, April 25, 2015

How to Repair a Clamshell Chip in Windshield

A clamshell chip in a car windshield looks just as it sounds. A small shell like indentation in a windshield causes both limited vision and a distracting obstruction. Below are instructions on how to repair a clamshell chip using professional glazing equipment.

Instructions

    1

    Use a small drill tool such as the kind used in hobby work to shade in the interior of the clamshell chip. This is a soft circular motion to even out the indentation. The surface of the glass will feel rough to the touch when you are finished.

    2

    Apply a sufficient amount of resin into the indentation to an even level. Use a dabbing motion to avoid spilling out too much. This glass resin is available at department stores or online.

    3

    Apply a sufficient amount of pit resin over the top of the resin in Step 2.

    4

    Place the resin patch that comes with the resin over the top of the clamshell chip. Push it down gently to balance out all the resin and mixing the two types of resin together in the process.

    5

    Allow resin to cure (in accordance with the instructions on the back of the packet) before scraping off with a small clean razor blade. Be sure to push along and not into the glass as you remove the resin from the surface.

    6

    Wipe across the surface of the now smooth and level glass surface with a little window cleaner and a soft cloth. This should remove any remaining resin residue.

    7

    Polish the glass either by hand or with a polishing tool to finish off the repair.

Read More..

Thursday, April 23, 2015

What is Paintless Dent Repair

Many times, you are simply in disbelief that your vehicle is sporting another dent or ding. It just doesnt take much to mar the beautiful cars surface. Anything from an errant rock to an out-of-control shopping buggy can all pose a significant hazard to your cars exterior. One of the best ways to repair these types of dents is with Paintless Dent Repair. However, there are certain requirements for the types of damage this process will be most effective on.

What Types of Damage Can Be Fixed with PDR?

The most common types of damage that are easily repaired with PDR are those that are in a door panel or fender. The dents do not have creasing or painted removed. They also cannot entail the trim area and need to be a certain distance away from the edge of the part.

What Is the PDR Process?

This process sounds rather simple; however, it takes a great deal of training and experience to get it right. The first step in the process is to gain access to the area behind the damage. This involves removing the inside door panel or perhaps removing a tire for access to a wheel well. Then, with the use of several specialized tools, the metal is massaged from behind. Once complete, there is no sign of the repair. Its also much less expensive than a traditional repair in a typical body shop. The entire time to do the repair only takes about one to two hours. If youve ever had your vehicle in a body shop, you know that it can days for your car to get fixed. This not only is inconvenient, you could not have access to your vehicle for days.

Let the Company Come to You

Almost all of the companies that offer this type of service offer mobile service as well. They will come to your location, such as your work or home and take care of the car. Its a very convenient way to get your car looking fantastic again. This is also a great idea for a leased or rented vehicle, too.

In Closing

The key to this process is choosing someone who has the training and experience to effect the repair properly. If not, you could end up with more damage than before and it could be very expensive to fix! For the best results, only use a PDR company that is well established, insured, and bonded.

Read More..

Friday, April 17, 2015

1995 Buick LeSabre Brake Pad Repair

stores.channeladvisor.com Click the above link to find the brake pads for your vehicle. In this video well show you how to replace your old brake pads with a new set.

Read More..

History and Techniques of Car Paint Repair

When you scratch or dent your car, removing the paint in the process, you have five options regarding the car paint repair from which to choose.

The first option , primarily for more extensive damage - is to take your car to a paint repair specialist (bodyshop or crash repair centre) to fix the damage and repaint the affected area. Usually this type of repair job can take several days.

The second option , primarily for minor damage (and if the car paintwork is not damaged) - is to have a paintless dent removal technician work on it, which will be much faster, cheaper and convenient as their mobile service personnel can come to you at a suitable time, rather than you going to them during your working hours.

The third option is to use a SMART repair technician (small to medium area repair technique) as these paint repair technicians specialise in minor repairs such as bumper scuffs and small scratches.

The fourth option is to attempt to do the repair job yourself, although this only solves the paint repair, not the actual dent or scratch itself. It goes without saying that if youre not experienced in this type of work, you could end up doing more harm than good, with a result that is a lot worse than when you started!

And the fifth option is to do nothing and leave it as it is. Of course, that doesnt really solve anything, but it doesnt cost you anything either. However, it is recommended that you at least "touch in" any scratches to prevent rust forming.

Which method of repair you choose depends on several different factors: the cost, the make of the car, the extent of the damage, and your car insurance cover.

If you dont have much money, then the first car paint repair option is eliminated. However, if your car is a Porsche, where the paint job comprises 21 different stages to ensure its durability, you may find the first repair option the only viable one available for major damages.

If the extent of the damage is minor, then the second or third paint repair options become the most practical, although the rather primitive touching-up method will always show much more so than the method of paintless dent removal followed by touching in, which is designed to disguise the damage to almost invisible. It is important to note that paintless dent removal is largely used when there is very minor or no paint damage.

Whichever method you choose, it is still hard to believe that the "paint" used in Auto Industry paint repair originated from a substance comprised of items such as berries, blood, plants, soot and ash, during the cave men era.

As the demand for vehicle paint increased dramatically, technologists were commissioned to discover faster ways of applying paint to automobiles. The three days needed for the numerous coats of standard paint to dry was hampering supply and a damaged car needing car paint repair was taking almost as long as a new one to finish!

Aside from perfecting the spray gun so that greater quantities of paint could be more accurately and evenly dispersed over the shell of a car, "dilutable" paint resins incorporating water were produced. These were more environmentally-friendly than previous ones, releasing water into the atmosphere upon drying instead of organic solvents and are still the ones used today.

Later, tiny metallic pieces which when administered would only be a depth of 15 microns (15 millionths of a metre) were added as well as pigments to the paints to vary the car paint palette and choice of car paint repair materials. To finish, a clear coat of protective resin was introduced over the paintjob to seal in the paint, add to durability, and give it that lustrous shine.

This explains why when you take your car to a garage it takes so long, why paintless dent removal is such good value, and why when you do a "touch up" car paint repair job yourself, it looks so noticeably different from the original manufacturers paintjob.

Ultimately, the idea is to try to avoid needing vehicle paint repair by driving safely and carefully, whilst still enjoying your pride and joy on the roads

Read More..

How to Repair the Disc Brakes on a Honda Element

How to Repair the Disc Brakes on a Honda Element

The Honda Element is a compact crossover SUV that entered the U.S. market in 2002. Like most vehicles, the Element uses disc brakes on the front wheels. This is a type of braking system in which the brake pads are attached to a caliper that pushes the pad against the rotor to slow the vehicle down. Your brake pads wear down over time, becoming less effective at slowing your vehicle. In extreme cases, worn-out brake pads can cause your brakes to fail, so replacing them when needed is an important responsibility.

Instructions

    1

    Park the Element on flat ground and turn off the engine. Make sure it is in "Park" and engage the emergency brake.

    2

    Loosen, but do not remove, the lug nuts on the front tires.

    3

    Jack up the front of the car. Place a jack stand underneath the outer frame on each side, and slowly lower the Element onto the jack stands.

    4

    Remove the lug nuts from the front tires, and take the tires off the car.

    5

    Remove the two bolts that hold the brake caliper in place. Lift the caliper off the wheel assembly, taking care not to pull or twist the brake line.

    6

    Remove the two pad springs that tie the brake pads together.

    7

    Grab the brake pads and slide them out of the wheel assembly. If you cannot get a grip on them, use a screwdriver to pull them out enough so you can grab them with your fingers.

    8

    Press the piston back into the rotor. You can use a clamp to do this, or a flat piece of metal such as a screwdriver or pry bar. Do not tear the rubber boot around the piston.

    9

    Apply brake grease to the anti-squeal plates and place them on the brake pads. The smaller plate goes on the pad with the wear indicator, which is the metal plate that sticks up on one end of the pad.

    10

    Install the pads onto the wheel assembly in the same position as the old pads you removed. Put the pad with the wear indicator on the back side of the rotor.

    11

    Install the pad springs by sliding them into the holes on top of the brake pads.

    12

    Place the brake caliper into position on the wheel hub and secure it with the bolts.

Read More..

Do it Yourself Rear Window Repair on Mitsubishi Truck

Fixing the rear window of your Mitsubishi truck is like fixing the back window of any other truck. Most of the time, this kind of repair would require replacing your old window with a new one, especially if the former is heavily damaged or has a crack. Remember, however, that if the crack is just a small one, applying a good sealant will do the trick, and you wont need to buy a new window for your vehicle.

Instructions

    1

    Check your rear windows for damage by using a pail of water and see if there is a leak. This will help you locate where the damage is and will make your job a lot easier.

    2

    Determine whether the seal or the window itself is damaged. This will help you decide whether you only have to seal a leak or a crack or replace the window with a new one. If the seal is broken go to Step 3, if its the window thats broken go straight to Step 4.

    3

    Replace the rubber seal on your rear window by cutting the rubber around it. Use your knife to do this. Take your time to remove the rubber until you can easily pull out the window. Put a new rubber seal around your window and put it back into the cars opening. Finish by applying a sealant. Make sure to have some water on hand so you can check if it seals perfectly.

    4

    Remove the rubber lock and then take out your window. Change the old window to the new one by firmly securing the area around it with the rubber seal. Finish this by applying sealant and then put the lock back in place.

    5

    Allow the sealant to cure for about 15 hours.

Read More..